Deutschland English
Home >> Kurzanleitung >> Bios-USB

How to set BIOS to boot from the USB Flash Drive

Generic procedure is as follows:

Step 1 . Insert newly created Windows Password Recovery Tool 3.0 USB Flash Drive in your computer.

Step 2 . Please reboot your computer and pres 'F2' or 'Delete' or "F10" to enter your BIOS setup.
Restart the computer which your want to reset Windows Password. As it starts it should display an option to enter the system set up menu, or BIOS, commonly reached by keys like DELETE, F1, F2, F10, F12 or Alt+S. Use whichever keystroke is indicated on screen. In some cases your computer may display a graphic while it starts. Typically, pressing Esc will dismiss the graphic and allow you to see the necessary messages.

Step 3 . Looking for a tab or menu relating to booting in the BIOS setup software's opening screen. In this example, it's simply called "BOOT," and can be accessed by using the tab and/or arrow keys to highlight the word "BOOT" on the menu bar. Once there, hit enter, and you'll see a submenu that's specific to how the PC boots.
bios setup

Step 4 . Using the tab and/or arrow keys,select "Hard Disk Drives", and hit "Enter".
bios setup

Step 5 . Select the "1st Drive", hit "Enter".
bios setup

Step 6 . Select the "USB: your USB brand", in the example it is "USB: Kingston DTG(2G)", and hit "Enter" to Set the USB Flash drive as the first bootable option.
bios setup

bios setup

Step 7 . When you're done with the BIOS setup program, using the tab and/or arrow keys to navigate to the EXIT menu, select the option for saving the changes you just made, and then reboot. (In many BIOSes, a special key--often the F10 key--will save, exit, and reboot in one step.) . When your computer restarts, it will boot from the USB flash drive.
bios setup

Click here to return to User's Guide >>

PasswordSeeker 2007 - 2012. Alle Rechte vorbehalten.